E3G-R13 Photoelectric Sensors NEW

E3G-R13 Omron Photoelectric Sensors NEW

Product Description:

Retroreflective Type , Pre-Wired Type , Sensing Distance 10m , Solid-state Output.

Specifications:

Sensing method	Retro-reflective with M.S.R. function
Sensing distance	0.5 m to 10 m (When using the E39-R2)
Standard sensing object	Opaque: 80 mm dia. Min.
Directional angle	Sensor:1 to 5 DEG
	Reflector:40 DEG Min.
Light source	Red LED (700nm)
Power supply voltage	10 to 30 VDC (ripple(p-p) 10% included)
Current consumption	50mA DC Max.
Control output (Output type)	NPN/PNP open collector output
Control output (Load current)	0 to 100 mA
Control output (Residual voltage)	(DC) 1.2 V Max. (NPN output, Load current 100mA Max.)
	(DC) 2 V Max. (PNP output, Load current 100mA Max.)
Operation mode	Light-ON/Dark-ON selectable
Load power supply voltage	30 VDC Max.
Protective circuit	Surge suppressor
	Output short-cut protection
	Power supply reverse polarity protection
	Mutual interference prevention
Response time	1 ms Max.
Sensitivity setting	Single-turn adjustment
Ambient illuminance	Incandescent lamp:3000 lux Max., Sunlight:10000 lux Max.
Ambient temperature	Operating: -25 to 55 CEL
	Storage: -30 to 70 CEL
	(with no icing or condensation)
Ambient humidity	Operating: 35 to 85 %RH
	Storage: 35 to 95 %RH
	(with no condensation)
Insulation resistance	20 M OHM Min. at 500 VDC between charged parts and the case
Dielectric strength	1000 VAC at 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance	10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance	500m/s2 for 3 times each in X, Y, and Z directions
Degree of protection	IEC60529: IP67
Applicable standard (EC Directive (Low Voltage Directive))	EN60947-5-2
Applicable standard (EC Directive (EMC Directive))	EMI: EN60947-5-2
	Emission Enclosure: EN55011 Group 1 class A
	EMS: EN60947-5-2
	Immunity ESD: IEC61000-4-2
	Immunity RF-interference: IEC61000-4-3
	Immunity Burst: IEC61000-4-4
	CE marking: Equipped
Connection method	Pre-wired models (Cable length: 2 m)
Indicator	Operation indicator(orange), Stability indicator(green)
Weight (packed state)	approx. 150 g
Tightening torque	1.2 N.m Max. (with M4 screw)
Material (case)	PBT
Material (lens)	Methacrylate resin
Material (cover)	Polyethyl sulfon
Accessories	Instruction manual, Adjustment driver, Reflector