E3F3-T31 Photoelectric Sensors NEW

E3F3-T31 Omron Photoelectric Sensors NEW

Product Description:

Threaded Cylindrical Photoelectric Sensor with Built-in Amplifier for Use as an Optical Proximity Sensor. High Noise-immunity with Photo-IC Technology

• Up-to-date photo-IC to increase noise immunity.

• M18 DIN-sized cylindrical housing, ABS resin case.

• Compact and space-saving.

• Long sensing distance (30 cm) with sensitivity adjustor for diffuse type.

• Short-circuit and reverse connection protection.

Specifications:

Sensing method	Through-beam	Retro reflective		Diffuse reflective
NPN output	E3F3-T11	E3F3-R11	E3F3-R12	E3F3-D11	E3F3-D12
	E3F3-T16	E3F3-R16	E3F3-R17	E3F3-D16	E3F3-D17
	E3F3-T61	E3F3-R61	E3F3-R62	E3F3-D61	E3F3-D62
	E3F3-T66	E3F3-R66	E3F3-R67	E3F3-D66	E3F3-D66
PNP output	E3F3-T31	E3F3-R31	E3F3-R32	E3F3-D31	E3F3-D32
	E3F3-T36	E3F3-R36	E3F3-R37	E3F3-D36	E3F3-D37
	E3F3-T81	E3F3-R81	E3F3-R82	E3F3-D81	E3F3-D82
	E3F3-T86	E3F3-R86	E3F3-R87	E3F3-D86	E3F3-D87
Sensing distance	5 m	3 m (Non-polarized when us-ing E39-R1)	2 m (Non-polarized when us-ing E39-R1)	100 mm	300 mm
Standard sensing object	Opaque object: 11 mm min.	Opaque object: 56 mm min.		100 × 100 mm white mat paper
Hysteresis	---			20% max. of sensing distance
Light source (wavelength)	Infrared LED (860 mm)	Red LED (680 mm)		Infrared LED (860 mm)
Power supply voltage	12 to 24 VDC±10%, ripple (p-p): 10% max.
Current consumption	45mA max. (light source and receiver)	25mA max.
Control output	Open collector transistor output, 100 mA max., residual voltage: 1 V max. at 100 mA
Protective circuit	Output short-circuit protection, DC power supply reverse polarity protection
Response time	1.0 ms max.
Sensitivity adjustment	---				Single-turn adjuster
Ambient illumination	Incandescent lamp: 3,000 lx max., Sunlight: 10,000 lx max.
Ambient temperature	Operating: –25 to 55 °C (with no icing or condensation) Storage: –30 to 70 °C (with no icing or condensation)
Ambient humidity	Operating: 45% to 85% (with no condensation) Storage: 35% to 95% (with no condensation)
Insulation resistance	20 MΩ min. (at 500 VDC) between current carry parts and case
Dielectric strength	1,000 VAC at 50/60 Hz for 1 min between current carry parts and case
Vibration resistance (destruction)	10 to 55 Hz, 1.5-mm double amplitude for 1 hour each in X, Y, and Z directions
Shock resistance (destruction)	500 m/s2 for 3 times each in X, Y, and Z directions
Degree of protection	IEC 60529 IP66
Connecting method	Pre-wired (standard length: 2 m)/M12 connector
Indicators	Operation indicator (orange) [Power indicator of emitter (orange)]
WeightPre-wired	Metal: 200 g max.	Metal housing: 100 g max.
?	Plastic: 170 g max.	Plastic housing: 85 g max.
Weight M12 connector	Metal: 120 g max.	Metal housing: 60 g max.
?	Plastic: 40 g max.	Plastic housing: 20 g max.
Packing	Nylon bag
Material Case	Plastic: ABS, Metal: Nickel-brass
Material Lens	PMMA
Material Accessories	Screw nuts: ABS or Nickel-brass
Accessories	Screw nuts (4), Instruction sheet	Screw nuts (2), E39-R1 reflector, Instruction sheet		Screw nuts (2), Instruction sheet	Screw nuts (2), Instruction sheet, Adjusting driver