E3C-LDA11 Amplifier Units NEW

E3C-LDA11 Omron Amplifier Units NEW

Product Description:

• All three beam types provide ample long-distance detection of 1,000 mm for Diffuse Reflective Models.

• Coaxial Retroreflective Models provide detection performance equivalent to through-beam sensors, simplifying Sensor installation.

• Industry-first variable focal point and optical axis alignment mechanisms. Optimize for workpieces and improve inspection quality.

• Drive the laser with an Amplifier the same size as a Digital Fiber Amplifier..

Specifications:

Power supply voltage	12 to 24 VDC -10% to 10% (ripple(p-p) :10% Max.)
Current consumption	45mA DC Max.
Power consumption	1080mW DC Max. (at 24 VDC)
Control output (Output type)	NPN open collector output
Control output (Load current)	0 to 50 mA
Control output (Residual voltage)	(DC) 1 V Max. (Load current 50mA Max.)
Operation mode	Light-ON/Dark-ON selectable
Load power supply voltage	26.4 VDC Max.
Protective circuit	Surge suppressor
	Output short-cut protection
	Power supply reverse polarity protection
	Mutual interference prevention
Sensitivity setting	Teaching method
Self-diagnostic output	Equipped
Timer function	ON-delay 1 ms to 5 s
	OFF-delay 1 ms to 5 s
	One-shot delay 1 ms to 5 s
Function	Twin-output, area output, differential operation
Ambient temperature	Operating: -25 to 55 CEL (Groups of 1 to 2 Sensors)
	Operating: -25 to 50 CEL (Groups of 3 to 10 Sensors)
	Operating: -25 to 45 CEL (Groups of 11 to 16 Sensors)
	Storage: -30 to 70 CEL
	(with no icing or condensation)
Ambient humidity	Operating: 35 to 85 %RH
	Storage: 35 to 85 %RH
	(with no condensation)
Insulation resistance	20 M OHM Min. at 500 VDC between charged parts and the case
Dielectric strength	1000 VAC at 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance	10 to 150 Hz, 0.7-mm double amplitude for 1.5 hours each in X, Y, and Z directions
Shock resistance	500m/s2 for 3 times each in X, Y, and Z directions
Degree of protection	IEC60529: IP50
Applicable standard (EC Directive (Low Voltage Directive))	EN60947-5-2
Applicable standard (EC Directive (EMC Directive))	EMI: EN60947-5-2
	Emission Enclosure: EN55011 Group 1 class A
	EMS: EN60947-5-2
	Immunity ESD: IEC61000-4-2
	Immunity RF-interference: IEC61000-4-3
	Immunity Burst: IEC61000-4-4
	CE marking: Equipped
Connection method	Pre-wired models (Cable length: 2 m)
Indicator	Operation indicator(orange), Digital display
Weight (packed state)	approx. 100 g
Material (case)	PBT
Material (cover)	Polycarbonate
Amplifier unit/sensor head of combination	E3C-LD**/LR**