E3C-JC4P Amplifier Units NEW

Item

Model

E3C-A

E3C-C

E3C-JC4P

E3C-GE4

Power supply voltage

100 to 240 VAC±10%, 50/60 Hz

12 to 24 VDC±10%, ripple (p-p): 1 V max.

Power (current) consumption

3 W max.

50 mA max.

Control output

Transis­tor output

Load power supply voltage: 24 VDC max., load current: 80 mA max., voltage output type, output current: 1 to 4 mA (residual voltage: 1.2 V max.) Light-ON/Dark-ON switch selectable

Load power supply voltage: 24 VDC max., load current: 100 mA max., NPN open collector output type (residual voltage: 1 V max.) Light-ON/Dark-ON switch se­lectable

Load power supply voltage: 24 VDC max., load current: 80 mA max., voltage output type, output current: 1 to 4 mA (residual voltage: 0.7 V max.) Light-ON/Dark-ON cable con­nection selectable

Relay out­put

220 VAC 1 A cosφ=1 (resistive load) SPDT contact only

--­

External synchronous input

--­

H = 6 to 30 V L = 0 to 2 V When L, turns OFF the control output forcibly.

--­

Timer function

--­

ON/OFF, oneshot delay (se­lectable): 1 or 10 s max.

OFF-delay 0/40 ms (switch se­lectable)

--­

Ambient temperature range

Operating: −10° to 55°C, Storage: −25° to 70°C (with no icing or condensation)

Ambient humidity range

Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)

Insulation resistance

20 MΩ min. at 500 VDC

Dielectric strength

500 VAC at 50/60 Hz for 1 minute

Vibration resistance

Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance

Destruction: 300 ms2 three times in each of X, Y and Z directions

Degree of protection

IEC IP20 (limited to indoor use)

IEC IP60 (limited to indoor use)

IEC IP20 (limited to indoor use)

Protection

Reverse polarity protection, output short-circuit protection, mutual interference prevention

Response time

No contact

Operate or reset: 1 ms max./2 ms max. each (switch select­able)

Operate or reset: 1 ms max.

Operate or reset: 1 ms max./2 ms max. each (switch selectable)

Relay

Operate or reset: 20 ms max.

--­

Connection method

Terminal block

Terminal block input cable pullout (standard cable length: 2 m)

Terminal block

Weight (packed state)

Approx. 200 g

Approx. 80 g

Approx. 15 g

Material

Case

ABS

Polycarbonate

Mounting Brackets

Stainless steel

--­

Iron

--­

Accessories

Connection Socket (PF113A) Instruction manual

Mounting Bracket,  Adjustment screwdriver, Caution label, Instruction manual

Instruction manual