E2E-X8D1-N Standard Proximity Sensor NEW

E2E-X8D1-N Omron Standard Proximity Sensor NEW

Product Description:

DC 2-Wire Model , Shielded , M30 , Sensing Distance 8mm , Operation Mode NO

Specifications:

Cylinder type sensing head size	M30
Type	Shielded
Sensing method	Inductive type
Sensing distance	8 mm -10% to +10%
Setting distance	0 to 6.4 mm
Differential distance	20% Max. of sensing distance
Sensing object	Ferrous metal (Sensitivity lowers with non-ferrous metals.)
Standard sensing object	Iron 54*54*1mm
Response frequency	DC: 30 Hz (average)
Power supply voltage	12 to 24 VDC (ripple(p-p) :10% Max.)
Operating voltage range	10 to 30 VDC
Leakage current	0.8 mA Max.
Control output (Output type)	DC 2-wire models with polarity
Control output (Switching capacity)	3 to 100 mA
Control output (Residual voltage)	(DC) 3 V Max. ?under load current with cable length of 2m?
Indicator	Operation indicator(red), Operation setting indicator(green)
Operation mode	NO
Protective circuit	Surge suppressor Output short-cut protection
Standard or Different frequency	Standard
Ambient temperature	Operating: 0 to 50 CEL Storage: 0 to 50 CEL (with no icing or condensation)
Ambient humidity	Operating: 35 to 95 %RH Storage: 35 to 95 %RH (with no condensation)
Temperature influence	+-20% Max. of sensing distance in temperature range of 0 to +50CEL (As the basis for sensing distance of 23CEL)
Voltage influence	+-2.5% Max. of sensing distance in rated voltage range +-10%. (As the basis for sensing distance at standard power voltage)
Insulation resistance	50 M OHM Min. at 500VDC between charged parts and the case
Dielectric strength	1000 VAC 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance	10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance	1000m/s2 for 10 times each in X, Y, and Z directions
Degree of protection	IEC60529: IP67 Company standard: Oil-proof
Applicable standard (EC Directive (Low Voltage Directive))	EN60947-1 EN60947-5-2
Applicable standard (EC Directive (EMC Directive))	EMI: EN60947-5-2 Emission Enclosure: CISPR11 Group 1 class A EMS: EN60947-5-2 Immunity ESD: IEC61000-4-2 Immunity RF-interference: IEC61000-4-3 Immunity Conducted Disturbance: IEC61000-4-6 Immunity Burst: IEC61000-4-4 CE marking: Equipped
Applicable standard (CCC mark)	Not equipped
Connection method	Pre-wired models (Cable length: 2 m)
Weight (Packed state)	approx. 220 g
Material (case)	Brass nickel plating
Material (sensing surface)	PBT
Material (clamping nuts)	Iron zinc plating
Material (toothed washer)	Iron zinc plating
Accessories	Instruction manual