E2EQ-X7D1 Cylindrical Proximity Sensor NEW

E2EQ-X7D1 Omron Cylindrical Proximity Sensor NEW

Product Description:

DC 2-Wire Model Shielded M18 Sensing Distance 7mm Operation Mode NO.

Specifications:

Cylinder type sensing head size	M18
Type	Shielded
Sensing method	Inductive type
Sensing distance	7 mm -10% to +10%
Setting distance	0 to 5.6 mm
Differential distance	10% Max. of sensing distance
Sensing object	Ferrous metal (Sensitivity lowers with non-ferrous metals.)
Standard sensing object	Iron 18*18*1mm
Response frequency	DC: 500 Hz (average)
Power supply voltage	12 to 24 VDC (ripple(p-p) :10% Max.)
Operating voltage range	10 to 30 VDC
Leakage current	0.8 mA Max.
Control output (Output type)	DC 2-wire models with polarity
Control output (Switching capacity)	3 to 100 mA
Control output (Residual voltage)	(DC) 3 V Max. ?under load current with cable length of 2m?
Indicator	Operation indicator(red), Operation setting indicator(green)
Operation mode	NO
Protective circuit	Surge suppressor
	Output short-cut protection
Standard or Different frequency	Standard
Ambient temperature	Operating: -25 to 70 CEL
	Storage: -25 to 70 CEL
	(with no icing or condensation)
Ambient humidity	Operating: 35 to 95 %RH
	Storage: 35 to 95 %RH
	(with no condensation)
Temperature influence	+-10% Max. of sensing distance in temperature range of -25 to +70CEL
	(As the basis for sensing distance of 23CEL)
Voltage influence	+-2.5% Max. of sensing distance in rated voltage range +-15%. (As the basis for sensing distance at standard power voltage)
Insulation resistance	50 M OHM Min. at 500VDC between charged parts and the case
Dielectric strength	1000 VAC 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance	10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance	1000m/s2 for 10 times each in X, Y, and Z directions
Degree of protection	IEC60529: IP67
	Company standard: Oil-proof
Applicable standard (EC Directive (Low Voltage Directive))	EN60947-1
	EN60947-5-2
Applicable standard (EC Directive (EMC Directive))	EMI: EN60947-5-2
	Emission Enclosure: CISPR11 Group 1 class A
	EMS: EN60947-5-2
	Immunity ESD: IEC61000-4-2
	Immunity RF-interference: IEC61000-4-3
	Immunity Burst: IEC61000-4-4
Applicable standard (CCC mark)	Not equipped
Connection method	Pre-wired models (Cable length: 5 m)
Material (case)	Fluoride resin coating (base:brass)
Material (sensing surface)	Fluoride resin
Material (clamping nuts)	Fluoride resin coating (base: brass)
Material (toothed washer)	Iron zinc plating
Accessories	Instruction manual