HPX-T2 AZBIL Fiber Amplifier NEW

HPX-T2 AZBIL Fiber Amplifier NEW

Product Description:

HPX-T General Use Auto-Tuning Fiber Optic Amplifier.

Overview?

Built-in Hyper-tuning automatically adjusts scanning characteristics.

Benefits? 

Digital Display indicates adjustment steps and scanning conditions.Indication includes incoming light level, light level margin insufficient sensitivity and maximum sensitivity setting.Choose from three levels of sensitivityRemote tuning available on the T3 typePulse-phase shift system provides mutual interference prevention

Specifications:

Catalog Listing		HPX-T1	HPX-T2	HPX-T3
Supply Voltage		10 to 30Vdc (ripple 10% max.)
Operation Mode		Light-On/Dark-On, switch selectable
Output Mode		NPN open collector	PNP open collector	NPN open collector
Remote Tuning		--	--	Yes
Control Output		Output switching circuit: 100mA max. (resistive load). Output dielectric strength: 30V max.
		Voltage Drop: 1V max. (at 100mA switching current). Output short-circuit protection.
Response Time		500µs max. for operation and recovery
Sensitivity Adjustment		Sensitivity and Hysteresis automatically set by button (auto-tuning)
Light Emitter		Red LED (680nm)
Display Functions	Digital Display	incoming light level (in RUN mode), Scanning margin/setting error (after sensitivity is set).
	Oper. Indicator	Red (lit when output is ON)
	Stability	Green (ON during stable L.O./ON during stable D.O.) OFF delay timer func.: ON/OFF indication
Timer Function		OFF delay of 40ms or instantaneous, switch selectable
Ambient Light Immunity		Incandescent lamp: 5,000 lux max. Sunlight: 20,000 lux max.
Operating Temperature		-20 to +55°C
Insulation Resistance		20M§Ù min. (at 500Vdc)
Dielectric Strength		1000Vac, 50/60Hz for 1 minute between case and electrically live metal
Vibration Resistance		10 to 55Hz, 1.5mm peak-to-peak amplitude, 3 times each in X, Y and Z directions