FL2R-4J6HD AZBIL Proximity Switch NEW

FL2R-4J6HD AZBIL Proximity Switch NEW

Product Description: 

Reduced wiring costs

Stable sensing area displayed by setting indicator

(on N.O. output type only)

Wide range of models available

(4/7/12/20mm, top/side, N.O./N.C.)

High-speed response (1.5kHz at 4mm, 1kHz at 7mm)

Different-frequency types that are only slightly

influenced by mutual interference available for all models

High seal capabilities (IP67)

Enhanced circuit protection

(surge absorption, loadshort-circuit, reverse connection)

Specifications:

Actuation method	High-frequency oscillating type (unshielded)
Rated supply voltage	12/24Vdc
Differential travel	15% max. of sensing distance
Operating voltage range	10 to 30Vdc
Leakage current	1mA max.
Control output	Switching current: 4 to 100mA max. Voltage drop: 3.3V max., Output dielectric strength: 30Vdc
Hysteresis	0.05mm max.
Temperature characteristics	10% max. of sensing distance for the -25 to +70° range when taking +25° as standard temperature
Supply voltage characteristics	1% max. of sensing distance with 15% voltage fluctuation, taking rated supply voltage as standard voltage
Indicator lamps	N.O. type: Operation indication: lights (red or green) at output ON Setting indication: lights (green) in stable sensing area N.C. type: Operation indication: red light goes out (red) in sensing area
Operating temperature range	-25 to +70°C
Storage temperature range	-25 to +70°C
Storage humidity range	35 to 95% RH
Insulation resistance	50MW min. (at 500Vdc)
Dielectric strength	500Vac, 50/60Hz for 1 minute
Vibration resistance	10 to 55Hz, 1.5mm peak-to-peak amplitude, 2 hrs each in X, Y and Z directions
Shock resistance	490m/s2 10 times each in X, Y and Z directions
Protection	IP67 (IEC standard)
Circuit protection	Surge absorption, load short-circuit protection, reverse connection protection
Wiring method	Pre-leaded connector, pre-leaded
Case material	ABS resin
Housing	Polyester elastomer
Holder	Glass-lined polyester resin
Contact	Gold-plated brass