PZ-G101P Photoelectric switch NEW

Sensitivity adjustment

1-turn trimmer (230°)

Response time

500 μs

Operation mode

LIGHT-ON/DARK-ON (switch-selectable

Control output

Open collector output, 30 V max., 100 mA max., Residual voltage: 1 V max.

Protection circuit

Reversed polarity, overcurrent protection, surge absorber

Power supply

10 to 30 VDC including Ripple ± 10 % (P-P)

Enclosure rating

IEC, IP67 / NEMA: 4x, 6, 12 / DIN: IP69K

Ambient light

Incandescent lamp: 5,000 lux max., Sunlight: 20,000 lux max.

Ambient temperature

-20 to 55 °C (-4 to 130 °F), No freezing

Relative humidity

35 to 85 %, No condensation

Vibration

10 to 55 Hz, 1.5 mm double amplitude in the X, Y, and Z directions, 2 hours respectively

Shock

1000 m/s2 6 times in the X, Y, and Z directions

Housing, M18 nut(threaded models only)

Glass-fiber reinforced PBT

Trimmer

Glass-fiber reinforced polyamide (PA)

Case connection

Screw: Steel, zinc-nickel plated, Packing: Nitrile-butadiene rubber (NBR)

Cable (cable models / pigtail
quick disconnect models only)

lyvinyl chloride (PVC)

Connector (pigtail quick
disconnect type only)

Brass-nickel plated, Polybutyleneterephthalate (PBT), Polyvinyl chloride (PVC)

Tightening torque

Rectangular models (Mounting hole part): 0.5 N·m max.
Threaded models (front M18 part): 1.0 N·m max., (side slotted hole part): 0.5 N·m max.

Accessories*2

Instruction manual, M18 nut x 2 pieces (nut thrubeam type),
M18 nut x 1 piece (other threaded models)

Weight

Rectangular cable models: Approx. 60 g (Thrubeam-models transmitter: Approx. 50 g)
Rectangular connector models: Approx. 10 g
Rectangular M12 pigtail quick disconnect model: Approx. 30 g
Threaded cable models: Approx. 65 g (Thrubeam-models transmitter: Approx. 55 g)
Threaded connector models: Approx. 15 g