WL280-P132 SICK Standard photoelectric switch NEW

WL280-P132 SICK Standard photoelectric switch NEW

Product Description:

Polarising filter

Red light

Flexible and ready for use with rotatable plug connector

Light-/dark-switchable

Reflector P 250 and mounting brackets (1.4301) included with delivery

Specifications:

Scanning range, max. typ./on reflector 0.01 ... 15 m/PL 80 A

Scanning range, max. typ./on reflector 0.01 ... 11 m/P 250

Operating range ?0.01 ... 10 m/P 250

Light source 1), light type ?LED, red light

Light spot diameter ?Approx. 280 mm at 10 m

Angle of dispersion, sender?Approx. 1.6°

Supply voltage VS? 10 ... 30 V DC 2)

Residual ripple 3) ?≤ 5 VPP

Current consumption 4)? ≤ 30 mA

Switching outputs? PNP, open collector: Q NPN, open collector: Q

Output current IA max?100 mA

Light receiver, switching mode ?Light-/dark-switching by rotary switch

Response time 5)?≤ 0.5 ms

Max. switching frequency 6) ?1000/s

Connection types ?Cable 7), 2 m Terminal chamber M12 plug, 4-pin

VDE protection class ?(to VDE 0106)

Circuit protection 8) ?A, B, C, D

Enclosure rating? IP 66

Ambient temperature ?Operation –25 °C ... +55 °C Storage –40 °C ... +70 °

Weight Approx?150 g

Housing material? Housing: ABS; optics: PMMA

1) Average service life 100,000 h at TA = +25 °C

2) Limit values, operation in short circuit protected network max. 8 A

3) May not exceed or fall short of VS tolerances

4) Without load

5) Signal transit time with resistive load

6) With light/dark ratio 1:1

7) Do not bend below 0 °C

8) A = VS connections reverse-polarity protected

B = Inputs/outputs reverse-polarity protected

C = Interference pulse suppression

D = Outputs overcurrent and short-circuit protected