No comment |
>
Transducer/Sensor >
Photoelectric Sensors >
Photoelectric Switch >
WS9-2N130 SICK Small photoelectric switch NEWWS9-2N130 SICK Small photoelectric switch NEWProduct Description:
Red-light emitters the LED as
alignment aid
Switching the frequency 200 / s.
Outputs short-circuit protected
The Test the input
Specifications:
Scanning range typ. max.
7 m
Suggested operating range
5 m
Supply voltage VS1)
DC 10 ... 30 V
Ripple 2)
≤ 5 VPP
Current consumption 3)
≤ 15 mA (WE); ≤ 60 mA (WS)
Light source
LED, visible red light 4)
Angle of dispersion
15°
Angle of reception
6°
Light spot diameter
1000 mm at a distance of 5 m
Switching outputs Q and Q
PNP
NPN
Signal voltage HIGH
VS – 2.9 V
VS
Signal voltage LOW 5)
Approx. 0 V
≤ 2.9 V
Output current IA max.
≤ 100 mA
Response time 6)
≤ 2.5 ms
Max. switching frequency 7)
200/s
Test input TE
VS or unswitched, sender active
0 V, sender inactive
Connection technology
Connection cable, 2 m
Cable, 120 mm, with plug M 12, 4 pin
Plug M 12, 4 pin
Plug M 8, 4 pin
VDE protection class M 128)
?
VDE protection class M 8
III
Protection type
IP 67
Protection circuits 9)
A, B, C
Ambient temperature 10)
Operation –40 ... +60 °C
Storage –40 ... +75 °C
Weight
with connection cable 2 m/120 mm
Approx. 80 g
with equipment plug M 12/M 8, 4 pin
Approx. 20 g
1) Limit values
2) Must be within VS tolerances
3) Without load
4) Average service life at room temperature 100,000 h
5) At TU = +25 °C and 100 mA output current
6) With resistive load
7) With light/dark ratio 1:1
8) Withstand voltage 50 V
9) A = supply connections reverse polarity protected
B = outputs short-circuit protected
C = interference suppression
10) Do not distort cable below 0 °C
No comment |