GL6-P4111 SICK Economic mini Photoelectric switch NEW

Product Description:

Pin-point accurate clear the LED light point Down in case of bush M3 mounting holes make installation more secure will

Built-in the SICK the crystal anti-ambient light, the effective stability of the sensing object is not any light interfere with

The more knob, use the can more easily adjust the sensor function

type bright LED status indicator lights to make it easier to install the calibration

Specifications:

Most maximum detection distance: 7.2 m

Operating range: 6 m

Recommended Use: reflection PL80A mirror

Light source and type: LED can be red, 650 nm1)

Spot diameter: 350mm at about 8mm

Polarizing filter:

Supply Voltage: VS 12 ... 24 V DC 2)

Ripple value: ± 10% 3)

Power consumption: ≤ 30 mA, 4)

Switch Output: NPN: open collector: Q-PNP: Q

Signal voltage of PNP HIGH / LOW: VS - 3 V / 0 V

Signal voltage NPN HIGH / LOW: about VS / 3 V

Output mode: Getting started light / shading action knob switch

Most maximum output current of IA max: 100 mA

Reaction time: <625 μs, 5)

Switching frequency: 1 kHz, 6)

Wiring type: cable 2m, PVC 7) the M8 4-pin connector VDE level of protection

Circuit Protection: Vs power polarity reverse protection / output short circuit protection / surge inhibit interference

industry level of protection: IP 67

Operating ambient temperature: -25 ° C ... +55 ° C

Storage ambient temperature; -40 ° C ... +70 ° C.

Weight: M8 plug attached, weighing about 20 g attached to 2 m cable, weighing about 60 g

Shell Material: ABS, PC, PMMA

Appendix: reflection P250, installation frame

1) below 25 ° C room temperature photo average use the number to 100,000 hour

2) limit, power polarity reverse protection, most 8A

3) can not short circuit or exceed the limit value of Vs

4) no load

5) Load the signal transmission time

6) light and dark output Contrast 1:1

7) 0 ° C the following