GTE6-N1212 SICK Economic mini Photoelectric switch NEW

Product Description:

Within Kan is M3 mounting holes to make the installation more secure will
Built-in the SICK the crystal anti-ambient light, the effective stability of the sensing object is not any light interfere with
The more knob, use the can more easily adjust the sensor function
type bright LED status indicator lights to make it easier to install the calibration

Specifications:

Most maximum detection distance: 300 mm 1)

Operating range: 250 mm 1)

Adjustable detection range: knob

Light source and type: LED can be red, 650 nm 2)

Spot diameter: about 90mm at 7mm

Supply voltage: VS 12 ... 24 V DC 3)

Ripple value: ± 10% 4)

Power consumption: ≤ 30 mA, 5)

Switch Output: NPN: open collector: Q-PNP: Q

Signal voltage of the PNP HIGH / LOW: VS - 3 V / 0 V

Signal voltage NPN HIGH / LOW: about VS / 3 V

Output mode: Getting started light / shading action knob switch

Most maximum output currentIA max? 100 mA

Reaction time ::<1,250 μs6)

Switching frequency7)? 500 Hz

Wiring type: Cable 2m PVC 8) M8 4-pin connector VDE level of protection

Circuit Protection: Vs power polarity reverse protection / output short circuit protection / surge inhibit interference

industry level of protection: IP 67

Operating ambient temperature: -25 ° C ... +55 ° C

Storage ambient temperature: -40 ° C ... +70 ° C.

Weight: M8 plug attached, about 20 g weight attached to 2 m cable, weighing about 60 g

Shell Material: ABS, PC, PMMA

Attachment: install frame, screws

1) the rate of 90% of the object reflectivity (light according to German DIN 5033 standard definition standard White the main)

2) below 25 ° C room temperature photo average use the number to 100,000 hour for

3) limit, power polarity reverse protection, most 8A

4) can not short circuit or exceed the limit value of Vs

5) no load

6) Load the signal transmission time

7) the light and dark output Contrast 1:1

8) 0 ° C the following