MHL15-N2236 SICK Photoelectric switch NEW

MHL15-N2236 SICK Photoelectric switch NEW

Product Description:

Polarizing filter for reliable detection of shiny surfaces

LED indicator: Switching output active and operation reserve

Optical axis axial

Mounting accessories

 

Specifications:

Scanning range SR, typ. max./reflect.	0.035 ... 5.0 m (PL 80 A)
Operating range	0.035 ... 3.5 m (PL 80 A)
Light spot diameter	Approx. 80 mm at 3.5 m
Angle of dispersion sender	Approx. 1.5°
Optical axis	Axial
Light source 1), light type	LED, red light, with pol. filter, 650 nm
Light reception indicator	Yellow LED: lights continuously:
	Reserve factor > 1.5
	Blinks: reserve factor > 1.0 ... < 1.5
Supply voltage VS	10 ... 30 V DC 2)
Residual ripple 3)	≤ 5 VPP
Current consumption 4)	≤ 30 mA
Switching outputs	Q: PNP
	Q: NPN
Signal voltage HIGH	VS – 2.9 V
	VS
Signal voltage LOW	Approx. 0 V
	≤ 2.9 V
Switching mode	Light-switching
	Dark-switching
Output current IA max.	≤ 100 mA
Response time 5)	≤ 1.25 ms
Max. switching frequency 6)	400/s
Connection type	plug M12, 3-pin
cable 7)	PUR, 2 m, 3 x 0.14 mm2, Ø 3.6 mm
VDE protection class 8)	?
Enclosure rating	IP 67
Circuit protection 9)	A, B, C
Ambient temperature TA	Operation –25 °C ... +55 °C
	Storage –25 °C ... +70 °C
Gewicht
with plug	Approx. 7 g
with cable 2 m	Approx. 90 g
Housing material	Housing: ABS
	Optic: PMMA

 

1) Average service life 100,000 h at TA = +25 °C

2) Limit values

3) May not exceed or fall short of VS tolerances

4) Without load

5) Signal transit time with resistive load

6) With light/dark ratio 1:1

7) Do not bend below 0 °C

8) Reference voltage 50 V DC

9) A =VS connections reverse-polarity protected

B = Interference pulse suppression

C = Outputs overcurrent and shortcircuit protected