No comment |
>
Transducer/Sensor >
Photoelectric Sensors >
Photoelectric Switch >
WL140-2N132 SICK Miniature photoelectric switch NEWWL140-2N132 SICK Miniature photoelectric switch NEWProduct Description:
Polarisation filter for detection of objects with shiny surfaces
Also suitable for "Diamond Grade" reflective tape
Red light as alignment aid
LED indicator: operating reserve
Specifications:
Scanning range typ. max: 0.01 ... 6.5 m
Scanning range, recommended: 0.01 ... 5 m
Relating to: Reflector PL80A
Sensitivity adjustment :Potentiometer
Light source, light type LED: Red light, 680 nm1)
Light spot diameter :Approx. 250 mm at 2.5 m distance
Angle of dispersion :Ca. 5.8 °
Polarisation filter:√
Supply voltage Vs: DC 10 ... 30 V2)
Ripple :± 10 %3)
Power consumption: ≤ 30 mA4)
Switching outputs :NPN: open collector: Q PNP: open collector: Q
Switching mode: Light-/dark-switching via rotary switch
Signal voltage PNP HIGH / LOW :Vs - 1.8 V / approx. 0 V
Signal voltage NPN HIGH / LOW: Approx. Vs / < 1.8 V
Output current Iamax: 100 mA
Response time :≤ 0.5 ms5)
Switching frequency :1,000 Hz6)
Connection type: Cable, PVC, 2 m7) Connector, M8, 3-pin
Connector, M8, 4-pin
VDE protection class:? 8)
Circuit protection ?Vs connections reverse-polarity protected/ In-/outputs short-circuit protected /Interference suppression / Outputs overcurrent and short-circuit protected
Enclosure rating? IP 67
Ambient temperature operation? -25 °C ... +55 °C
Ambient temperature storage? -40 °C ... +70 °C
Weight ?Ca. 53 g Ca. 9 g
Housing materia?l PBT, PMMA
1) Average service life 100,000 h at Ta = +25 °C
2) Limit values, operation in short-circuit protected network max. 8 A
3) May not exceed or fall short of Vs tolerances
4) Without load
5) Signal transit time with resistive load
6) With light/dark ratio 1:1
7) Do not bend below 0 °C
8) Reference voltage 50 V DC
No comment |