FD-ENM1S1 Photoelectric Sensors New in box

Sunx Photoelectric Sensors FD-ENM1S1 New in box

 Product Description:

The FT series of thrubeam fiber optics is a wide-ranging family of sensing heads that are suitable for use in all Panasonic fiber amplifiers. Fiber types include standard, high flexibility, special use, and environmentally resistant. Each type is broken down further to include various configurations such as side-view, ultra-small diameter, high precision, and wide beam.

Features? 

Type		Special use
		Ultra-small diameter	Convergent reflective	Tough flexble
Model No.		FT/FD-E12/E22 FD-EN500S1 FD-ENM1S1	FD-L4?	FT/FD-P81X FD-G6X
Allowable bending radius		FT-E12/E22: R5 mm R0.197 in or more (Note 2) FD-E12: R10 mm R0.394 in or more (Note 2) FD-E22/EN500S1/ENM1S1: R25 mm R0.984 in or more (Note 2)	R10 mm R0.394 in or more FD-L43/L45: R4 mm R0.157 in or more, FD-L45A, FD-L46: R25 mm R0.984 in or more	R10 mm R0.394 in or more
Ambient temperature		FT-E12/E22, FD-E22: -40 to +70 °C -40 to +158 °F FD-E12: -40 to +60 °C -40 to +140 °F FD-EN500S1/ENM1S1: -20 to +60 °C -4 to +140 °F	FD-L43/L45/L45A: 0 to +70 °C +32 to +158 °F FD-L41/L44/L44S/L46: -40 to +60 °C -40 to +140 °F FD-L4: -40 to +70 °C -40 to +158 °F	-40 to +60 °C -40 to +140 °F (FD-P81X: -40 to +70 °C -40 to +158 °F)
Ambient humidity		35 to 85 % RH (No dew condensation or icing allowed)
Material	Fiber core	Acrylic
	Sheath	Polyolefin	Polyethylene	Polyethylene [FT-P81X: Vinyl chloride, Protective tube: Stainless steel (SUS)]
	Fiber head	Brass (Nickel plated) [Sleeve: Stainless steel (SUS)]	FD-L41/L43/L45/L45A: Heat-resistant ABS Case of FD-L4/L46: ABS [Case of FD-L44/L44S: Polycarbonate, Slit of FD-L44S: Stainless steel (SUS304), Lens of FD-L4/L43/L44/L44S/L45/L45A: Acrylic, Front film of FD-L41: Polyester, Lens of FD-L46: Norbornene resin]	FT-P81X, FD-P81X: Brass (Nickel plated) FD-G6X: Stainless steel (SUS)
Accessories (Note 3)		All fibers: 1 fiber attachment set Threaded head fibers: Nuts 2 pcs. (FT-E12/E22: 4 pcs.) and toothed lock washer 1pc. (FT-E12/E22: 2 pcs.)	All fibers: 1 fiber attachment set and FX-CT2 (fiber cutter) 1pc. FD-L4: M2.6 (length 12 mm 0.472 in) screws with washers 2 pcs. and nuts 2 pcs.	All fibers: 1 fiber attachment set, nuts 2 pcs. (FT-P81X: 4 pcs.) and toothed lock washer 1 pc.(FT-P81X: 2 pcs.) FD-G6X: FX-CT2 (fiber cutter) 1 pc.

Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F.
2) Sleeve part cannot be bent.
3) The five types of attached fiber attachments (FX-AT2/AT3/AT4/AT5/AT6) described in this catalog are for use only with the FX-100/300/311/410 series. Only one of these five fiber attachments is provided with each fiber.