EX-11A Photoelectric Sensor New in box

SUNX Photoelectric Sensor EX-11A New in box

 Product Description:

The EX-10 series is one of the smallest sensors on the market today. The ultra small size allows for mounting in the smallest areas. The size is achieved by locating all of the electronics and controls in an in-line amplifier. A bright 2-color indicator on the sensor head allows for quick determination of the sensor state.

The EX-10 series is also equipped with a 0.5ms response time for high-speed detection and an IP-67 rated housing for wash-down environments. The mounting options available include a front sensing type as well as a side sensing type. Each type has two, metal reinforced M3 mounting holes for stable sensor placement. All types are available as either Light ON or Dark ON and PNP or NPN.

Features? 

Type		Thru-beam
		Front sensing	Side sensing	Front sensing	Side sensing	Front sensing
Model No. (Note 2)	Light-ON	EX-11A (-PN)	EX-11EA (-PN)	EX-13A (-PN)	EX-13EA (-PN)	EX-19A (-PN)
	Dark-ON	EX-11B (-PN)	EX-11EB (-PN)	EX-13B (-PN)	EX-13EB (-PN)	EX-19B (-PN)
Sensing range		150 mm 5.906 in		500 mm 19.685 in		1 m 3.281 ft
Min. sensing object		ø1 mm ø0.039 in opaque object (Completely beam interrupted object) (Setting distance between emitter and receiver: 150 mm 5.906 in)		ø2 mm ø0.079 in opaque object (Completely beam interrupted object) (Setting distance between emitter and receiver: 500 mm 19.685 in)		ø2 mm ø0.079 in opaque object (Completely beam interrupted object) (Setting distance between emitter and receiver: 1 m 3.281 ft)
Hysteresis		-
Repeatability (perpendicular to sensing axis)		0.05 mm 0.002 in or less
Supply voltage		12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption		Emitter: 10 mA or less, Receiver: 15 mA or less
Output		NPN open-collector transistor ?Maximum sink current: 50 mA ?Applied voltage: 30 V DC or less (between output and 0 V) ?Residual voltage: 1 V or less (at 50 mA sink current) 0.4 V or less (at 16 mA sink current) PNP open-collector transistor ?Maximum source current: 50 mA ?Applied voltage: 30 V DC or less (between output and +V) ?Residual voltage: 1 V or less (at 50 mA source current) 0.4 V or less (at 16 mA source current)
	Utilization category	DC-12 or DC-13
	Short-circuit protection	Incorporated
Response time		0.5 ms or less (Note 7)
Operation indicator		Red LED (lights up when the output is ON)
Incident beam indicator		-
Stability indicator		Green LED (lights up under stable light received condition or stable dark condition)
Pollution degree		3 (Industrial environment)
Protection		IP67 (IEC)
Ambient temperature		-25 to +55 °C -13 to +131 °F (EX-17W: -25 to +50 °C -13 to +122 °F) (No dew condensation or icing allowed), Storage: -30 to +70 °C -22 to +158 °F
Ambient humidity		35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance		Incandescent light: 3,000 lx at the light-receiving face
EMC		EN 60947-5-2
Voltage withstandability		1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance		20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance		10 to 500 Hz frequency, 3 mm 0.118 in amplitude in X, Y and Z directions for two hours each
Shock resistance		500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each
Emitting element		Red LED (Peak emission wavelength: 680 nm 0.027 mil, modulated)
Material		Enclosure: Polyethylene terephthalate Lens: Polyalylate
Cable (Note 8)		0.1 mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Cable extension		Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable (thru-beam type: emitter and receiver).
Weight		Net weight (each emitter and receiver): 20 g approx., Gross weight: 60 g approx.
Accessories		Mounting screws: 1 set

Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F.
2) Model Nos. having the suffix "-PN" are PNP output type.
3) Either Light-ON or Dark-ON can be selected by the operation mode switch (located on the receiver).
4) The sensing range and the sensing object of the retro reflective type sensor are specified for the RF-200 reflector. Further, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 30 mm 1.181 in away. However, if the reflector is set 100 mm 3.937 in or less away, the sensing object should be opaque.

5) In case of using this product at a sensing range of 50 mm 1.969 in or less, take care that the sensitivity adjustment range becomes extremely narrow.
6) Make sure to confirm detection with an actual sensor before use.