CZ-K1 KEYENCE Sensor NEW

CZ-K1 KEYENCE Sensor NEW

Product Description:

High-speed 300 μs, the Response

The amplifier includes a 300 us high-speed response mode. As an example of the speed provided, the system is capable of detecting marks that are 1 mm wide on a web being fed at a speed of 3.3 m / s. (HSPD = during high-speed the mode operation)

Built in Self-stabilizer

The self-stabilizer monitors variations in the amount of light produced by each LED and works to ensure the light is transmitted is maintained at a constant and uniform level. Thiscancels the effects of temperature fluctuations and the passage of time on the efficiency of transmitter light.

Eight-color the Registration and External Tuning

The 8-bank switching feature allows you to store 8 settings in the amplifier's memory and switch among them using an external signal generated by a PLC. There is also an external tuning feature that lets you use an external device such as a push-button to the trigger the SET operation.

Type		Main unit
Model	NPN	CZ-K1
	PNP	CZ-K1P
Light source		Red LED, Green LED, Blue LED
Response time		300 µs/1 ms (switch-selectable)
Operation mode		Match output: Turns on when target colour matches registered colour. Mismatch output: Turns on when target colour is different from registered colour. (switch-selectable)
Timer function		OFF-delay timer (40 ms)/Timer OFF (switch-selectable)
Control output		NPN or PNP 40 VDC max. (100 mA max.), Residual voltage: 1.0 V max.
Power supply		12 to 24 VDC ±10%, Ripple (P-P): 10% max.
Ambient light		Incandescent lamp: 5,000 lux max., Sunlight: 10,000 lux max.
Ambient temperature		-10°C to +55°C (14 to 131°F), No condensation
Relative humidity		35 to 85%, No condensation