H7BX-AWD1 Counter NEW

H7BX-AWD1 OMRON Counter NEW

OMRON Counter H7BX-AWD1         

Product Description:

Highly visible display with backlit transmissive LCD.

Selectable display color (red/green) enables checking output status at a distance.

Easy operation with a key for each digit.

Perform all basic settings with a DIP switch.

Provides a total and preset counter, batch counter, dual counter, and tachometer (See note.).

Wide range of inputs accepted for NPN/PNP inputs (multi-inputs) and 2-wire DC sensors.

Complies with UL, CSA, and CE marking.

Degree of protection: IP54 equivalent (front section only).

Note:The functions that can be selected depend on the model.

Specifications:

Model		H7BX-A/AD1	H7BX-AW/AWD1
Type		Preset counter	Preset counter/tachometer
Supported configurations		1-stage preset counter, total and preset counter	1-stage preset counter,
		(See note 1.) (selectable)	2-stage preset counter,
			total and preset counter (See note 1.),
			batch counter, dual counter, tachometer (selectable)
Ratings	Power supply voltage	100 to 240 VAC (50/60 Hz)
	(See note 2.)	24 VAC (50/60 Hz)/12 to 24 VDC (ripple 20% max.)
	Operating voltage range	85% to 110% of rated supply voltage (90% to 110% at 12 VDC)
	Power consumption	H7BX-A/AW: 9.6 VA max. (100 to 240 VAC)
		H7BX-AD1/AWD1: 8 VA max. (24 VAC), 5.3 W max. (12 to 24 VDC)
Mounting method		Flush mounting
External connections		Screw terminals
Degree of protection		IP54 (front section only)
Input signals		CP1, CP2, reset 1, reset 2, key protection
Counter	Max. counting speed	30 Hz or 5 kHz (selectable, ON/OFF ratio 1:1), setting for both CP1 and CP2
	Input modes	Increment, decrement, command (UP/DOWN A), individual (UP/DOWN B), quadrature (UP/DOWN C)
	Output modes	N, F, C, R, K-1, P, Q, A, K-2, D, L	N, F, C, R, K-1, P, Q, A, K-2, D, L, H
	One-shot output time	0.01 to 99.99 s
	Reset input	External reset (minimum reset input signal width: 1 ms or 20 ms selectable), manual reset, and automatic reset (internal according to C, R, P, and Q mode operation)
Tachometer	Pulse measurement	---	Periodic measurement
	method		(Sampling period: 200 ms)
	Max. counting speed	---	30 Hz or 10 kHz (selectable)
	Measuring ranges	---	30 Hz: 0.01 to 30.00 Hz
			10 kHz: 0.01 Hz to 10 kHz
	Measuring accuracy	---	±0.1% FS ±1 digit max. (at 23±5 ° C)
	Output modes	---	Upper and lower limits, area, upper limit, lower limit
	Auto-zero time	---	0.1 to 99.9 s
	Startup time	---	0.0 to 99.9 s
	Average processing	---	OFF/2/4/8 times
Prescaling function		Yes (0.001 to 99.999)
Decimal point adjustment		Yes (rightmost 3 digits)
Sensor waiting time		290 ms max.
		(Control output is turned OFF and no input is accepted during sensor waiting time.)
Key protection input		Response speed: Approx. 1 s
		No-voltage NPN input (fixed)
		Short-circuit (ON) impedance: 1 k Ω max. (Leakage current at 0 Ω: Approx. 12 mA)
		Short-circuit (ON) residual voltage: 3 V max.
		Open (OFF) impedance: 100 kΩ min.
Input method		No-voltage NPN input or voltage PNP input (selectable)
(except key protection input)		No-voltage input
		Short-circuit (ON) impedance: 1 kΩ max. (Leakage current at 0 Ω: Approx. 12 mA)
		Short-circuit (ON) residual voltage: 3 V max.
		Open (OFF) impedance: 100 kΩ min.
		Voltage input
		High level: 4.5 to 30 VDC
		Low level: 0 to 2 VDC
		Input resistance: Approx. 4.7 kΩ
External power supply		12 VDC (±10%), 100 mA (For details, refer to External Power Supply on Datasheet.)
Control output		Contact output: 3 A at 250 VDC/30 VDC, resistive load (cos Φ = 1)
		Minimum applied load: 10 mA at 5 VDC (Failure level: P, reference value)
		Transistor output: 100 mA max. at 30 VDC max.
		Residual voltage: 1.5 VDC max. (approx. 1 V)
		Leakage current: 0.1 mA max.
Display (See note 3.)		Backlit 7-segment negative transmissive LCD
		Character Heights
		PV: 13.5 mm (red/green)
		SV: 9 mm (green)
Digits		6 digits	6 digits
		- 99,999 to 999,999	Counter: - 99,999 to 999,999
		(5 digits negative and 6 digits positive)	(5 digits negative and 6 digits positive)
			Tachometer: 0 to 999,999 (6 digits)
Memory backup		EEPROM (Overwrites: 100,000 min.), Data storage: 10 years min.
Ambient operating temperature		- 10 to 55 ° C (with no icing)
Ambient storage temperature		- 25 to 65 ° C (with no icing)
Ambient operating humidity		25 to 85 ° C (with no condensation)
Case color		Black (N1.5)
Accessories		Two flush-mounting adapters, terminal cover	Two flush-mounting adapters,
			terminal cover,
			DIP switch setting stickers

Note:

1.The total and preset counter functions as a 1-stage preset counter and total counter.

2.Do not use an inverter output for the power supply.

3.Displayed only when the power is ON. Not displayed when the power is OFF.

Insulation resistance	100 MΩ min. (at 500 VDC) between current-carrying terminal and exposed
	non-current-carrying metal parts, and between non-continuous contacts
Dielectric strength	Between current-carrying metal parts and non-current-carrying metal parts:
	2,000 VAC, 50/60 Hz for 1 min
	Between power supply and input circuit: 2,000 VAC, 50/60 Hz for 1 min
	(for models other than the H7BX-A[]D1)
	1,000 VAC, 50/60 Hz for 1 min (H7BX-A[]D1)
	Between control output, power supply, and input circuit: 2,000 VAC, 50/60 Hz for 1 min
	Between non-continuous contacts: 1,000 VAC, 50/60 Hz for 1 min
Impulse withstand voltage	Between power terminals: 3.0 kV (1.0 kV for 24 VAC/12 to 24 VDC models)
	Between current-carrying terminal and exposed non-current-carrying metal parts:
	4.5 kV (1.5 kV for 24 VAC/12 to 24 VDC models)
Noise immunity	Between power terminals: ±1.5 kV
	Between input terminals: ±600 V
	Square-wave noise by noise simulator (Pulse width: 100 ns/1 μs, 1-ns rise)
Static immunity	Malfunction: 8 kV
	Destruction: 15 kV
Vibration resistance	Destruction: 10 to 55 Hz, 0.75-mm single amplitude, 2 hours each in three directions
	Malfunction: 10 to 55 Hz, 0.50-mm single amplitude, 10 minutes each in three directions
Shock resistance	Destruction: 294 m/s2 3 times each in 6 directions
	Malfunction: 98 m/s2 3 times each in 6 direction
Life expectancy	Mechanical: 10,000,000 operations min.
	Electrical: 100,000 operations min. (3 A at 250 VAC/30 VDC, resistive load) *
Weight	Approx. 250 g