E5CC-RX2ASM-800 Thermostat NEW

E5CC-RX2ASM-800 OMRON Thermostat NEW

OMRON Thermostat E5CC-RX2ASM-800      

Product Description:

Large White PV Display That's Easier to Read. Easy to Use, from Model Selection to Setup and Operation. A Complete Range of I/O Capacities, Functions, and Performance. Handles More Applications.

Specifications:

Indication accuracy		Thermocouple: (± 0.3% of indicated value or ± 1°C, whichever is greater) ± 1 digit max. *1
(at the ambient temperature of		Platinum resistance thermometer: (± 0.2% of indicated value or ± 0.8°C, whichever is greater) ±
23°C)		1 digit
		Analog input: ± 0.2% FS ± 1 digit max.
		CT input: ± 5% FS ± 1 digit max.
Transfer output accuracy		± 0.3% FS max.
Remote SP Input Type		± 0.2% FS ± 1 digit max.
Influence of temperature *2		Thermocouple input (R, S, B, W, PL II): (± 1% of PV or ± 10°C, whichever is greater) ± 1 digit max.
		Other thermocouple input: (± 1% of PV or ± 4°C, whichever is greater) ± 1 digit max. *3
		Platinum resistance thermometer: (± 1% of PV or ± 2°C, whichever is greater) ± 1 digit max.
		Analog input: (± 1%FS) ± 1 digit max.
		CT input: (± 5% FS) ± 1 digit max.
Influence of voltage *2		Remote SP input: (± 1% FS) ± 1 digit max.
Input sampling period		50 ms
Hysteresis		Temperature input: 0.1 to 999.9°C or °F (in units of 0.1°C or °F) *4
		Analog input: 0.01% to 99.99% FS (in units of 0.01% FS)
Proportional band (P)		Temperature input: 0.1 to 999.9°C or °F (in units of 0.1°C or °F) *4
		Analog input: 0.1% to 999.9% FS (in units of 0.1% FS)
Integral time (I)		0 to 9999 s (in units of 1 s), 0.0 to 999.9 s (in units of 0.1 s) *5
Derivative time (D)		0 to 9999 s (in units of 1 s), 0.0 to 999.9 s (in units of 0.1 s) *5
Proportional band (P) for cooling		Temperature input: 0.1 to 999.9°C or °F (in units of 0.1°C or °F) *4
		Analog input: 0.1% to 999.9% FS (in units of 0.1% FS)
Integral time (I) for cooling		0 to 9999 s (in units of 1 s), 0.0 to 999.9 s (in units of 0.1 s) *5
Derivative time (D) for cooling		0 to 9999 s (in units of 1 s), 0.0 to 999.9 s (in units of 0.1 s) *5
Control period		0.1, 0.2, 0.5, 1 to 99 s (in units of 1 s)
Manual reset value		0.0 to 100.0% (in units of 0.1%)
Alarm setting range		-1999 to 9999 (decimal point position depends on input type)
Affect of signal source resistance		Thermocouple: 0.1°C/Ω max. (100 Ωmax.)
		Platinum resistance thermometer: 0.1°C/Ω max. (10 Ω max.)
Insulation resistance		20 MΩ min. (at 500 VDC)
Dielectric strength		2,300 VAC, 50 or 60 Hz for 1 min (between terminals with different charge)
Vibration	resistance	10 to 55 Hz, 20 m/s2 for 10 min each in X, Y, and Z directions
	Malfunction	10 to 55 Hz, 20 m/s2 for 2 hrs each in X, Y, and Z directions
Destruction	Shock resistance	100 m/s2, 3 times each in X, Y, and Z directions
	Malfunction	300 m/s2, 3 times each in X, Y, and Z directions
Weight		Controller: Approx. 120 g, Mounting Bracket: Approx. 10 g
Degree of protection		Front panel: IP66, Rear case: IP20, Terminals: IP00
Memory protection		Non-volatile memory (number of writes: 1,000,000 times)
Setup Tool		CX-Thermo version 4.4 or higher
Setup Tool port		E5CC top panel: An E58-CIFQ2 USB-Serial Conversion Cable is used to connect a USB port on the
		computer with the port on the top panel of the E5CC. *6
Standards	Approved standards	UL 61010-1, CSA C22.2 No. 611010-1 (evaluated by UL)
	Conformed standards	EN 61010-1 (IEC 61010-1): Pollution level 2, overcurrent category II, Lloyd's standards *7
EMC		EMI: EN61326
		Radiated Interference Electromagnetic Field Strength: EN 55011 Group 1, class A
		Noise Terminal Voltage: EN 55011 Group 1, class A
		EMS: EN 61326
		ESD Immunity: EN 61000-4-2
		Electromagnetic Field Immunity: EN 61000-4-3
		Burst Noise Immunity: EN 61000-4-4
		Conducted Disturbance Immunity: EN 61000-4-6
		Surge Immunity: EN 61000-4-5
		Voltage Dip/Interrupting Immunity: EN 61000-4-11

*1.The indication accuracy of K thermocouples in the -200 to 1300°C range, T and N thermocouples at a temperature of -100°C max., and U and L thermocouples at any temperatures is ±2°C ±1 digit max. The indication accuracy of the B thermocouple at a temperature of 400°Cmax. is not specified. The indication accuracy of B thermocouples in the 400 to 800°Crange is ±3°C max. The indication accuracy of the R and S thermocouples at a temperature of 200°C max. is ±3°C ±1 digit max. The indication accuracy of W thermocouples is ±0.3 of PV or ±3°C, whichever is greater, ±1 digit max. The indication accuracy of PL II thermocouples is ±0.3 of PV or ±2°C, whichever is greater, ±1 digit max.

*2.Ambient temperature: -10°C to 23°C to 55°C, Voltage range: -15% to 10% of rated voltage

*3.K thermocouple at -100°C max.: ±10°C max.

*4."EU" stands for Engineering Unit and is used as the unit after scaling. For a temperature sensor, the EU is °C or °F.

*5.The unit is determined by the setting of the Integral/Derivative Time Unit parameter.

*6.External communications (RS-485) and USB-serial conversion cable communications can be used at the same time.

*7.Refer to information on maritime standards in Shipping Standards for E5[]N/E5[]N-H on Data Sheet for compliance with Lloyd's Standards.