C26TV0UA1000 AZBIL Thermostat NEW

C26TV0UA1000 AZBIL Thermostat NEW

Product Description:

The DigitroniK SDC26 is a digital indicating controller featuring multiple

input types and a PID control system using the new "RationaLOOP" and

"Just-FiTTER" algorithms.

Up to two control outputs (depending on the exact model) can be used,

which are selectable from relay, voltage pulse, and current output.

Specifications? 

PV input	Type	Selectable from multiple input types: thermocouple, RTD, DC current and DC voltage
	Sampling cycle	0.3s
Indication	Indication method	4-digit, 7-segment LED. (PV: Upper green display, SP: Lower orange display)
	Indication accuracy	±0.3% FS ± 1 digit. In the negative area of the thermocouple, the accuracy is ±0.6% FS ± 1 digit (at an ambient temperature of 23 ± 2°C)
Control output	Model No. Segment III	R0	V0	VC	VV	C0	CC
	Control output 1	Relay	Voltage pulse(for  SSR drive)	Voltage pulse(for  SSR drive)	Voltage pulse(for  SSR drive)	Current	Current
	Control output 2	-	-	Current	Voltage pulse(for  SSR drive)	-	Current
	Control method	ON/OFF control, Time proportional PID, Current proportional PID
	No. of PID groups	Max. 4
	PID auto-tuning	Automatic PID value setting by limit cycle method. However, one of the following 3 control characteristics can be selected: • Standard • Quick disturbance response • Less up-down fluctuations
Remote switch inputs	NO.of inputs	Max. 4
	Function	Up to 4 kinds of SP selections, RUN/READY selection, input AUTO/MANUAL selection, Auto-tuning stop/start, etc
Event	No. of outputs	2 to 3 (according to the model)
	Type	PV high limit, PV low limit, PV high/low limit, Deviation high limit, Deviation low limit, Deviation high/low limit, etc.
Communications		RS-485
Current transformer inputs		2 (option)
General	Power	AC model: 100 to 240Vac 50/60Hz DC model: 24Vac 50/60Hz / 24Vdc
	Power consumption	AC model: 12VA max. DC model: 12VA max. (24Vac), 8W max. (24Vdc)
	Standards compliance	CE: EN61010-1,EN61326 cUL: File No. E246616
	Mass	Approx. 300g (including socket)