C300DA000100 AZBIL Regulator NEW

C300DA000100 AZBIL Regulator NEW

Product Description:

The DigitroniK SDC30 is a compact (48 mm x 96 mm)

digital indicating controller offering standard PID control

and an advanced neural/fuzzy PID that performs process

diagnostics and reduces overshoot.

The SDC30 offers full, multi-range inputs, selectable from

the keypad, including thermocouple, resistance temperature

detector (RTD), DC voltage and DC current inputs.

The SDC30 provides a comprehensive range of strategies

including time proportional PID (relay output, voltage output),

current output PID, and position proportional PID.

The controller also enhances process visibility with such

functions as remote switch input, control parameters, and

local set points, which can be easily set using the smart

loader package.

High accuracy of ±0.2% FS.

• Input types and ranges are selectable at the keypad.

• SP1 to SP8 can be selected by the operators.

• 8 groups of PID control constants are provided. Each

PID group can be optimized using a range of configurable

values.

• Neural/Fuzzy and conventional autotuning allows simultaneous

implementation of the rising, disturbance response,

and overshoot prevention characteristics.

• Abnormal operation diagnostics allow automatic

changeover of motors to their estimated stop position

by detection of abnormal feedback resistance.

• Control loop diagnostics check the output condition at

PV change.

• PV bias and RSP bias can be set.

The setpoint value ramp function allows setting of the

SP change ratio.

• Two event outputs are provided: enabling one with a

timer function, and a motor opening event to be set.

• The operation modes are selectable by external switch

inputs (local/remote, auto/manual, RUN/READY, selection

of 8 local set points, AT start, direct/reverse action,

timer event start).

• Versatile optional functions support a broad range of

applications:

[1] Event outputs (2 points)

[1] Digital inputs (1 or 4 points)

[1] Auxiliary output (1 point)

[1] RS-485 Communications

• CE marking compliant

Adaptive standards: EN61010-1, EN50081-2,

EN50082-2