SRF106AS00100 AZBIL Recorder NEW

SRF106AS00100 AZBIL Recorder NEW

Product Description:

Any combination of different inputs and recording scale can

be set freely.

DC voltage, thermocouple, resistance temperature detector

(RTD), communications, ON/OFF input

• Five recording formats are provided and can be freely selected:

Trend recording, trend + tabulation recording, trend +

schedule demand recording, fixed-time recording, fixeddate

recording

• Six measurement and calculation methods are provided

and can be selected to each channel:

Measurement value (PV value), deviation value between

channels, deviation value from fixed value, total calculation,

F value calculation, relative humidity calculation

• Free power supply allows use anywhere:

100 to 240V ac, 50/60 Hz

• Compact design. Only 187 mm deep

• Wide range of printing functions:

- Measurement value (PV value)

- Channel No.

- Tag (12 characters per channel)

- Engineering unit (6 characters per channel)

- Recording scale (2 types, upper/lower limit values)

- Chart feed speed

- Event status (details, time of occurrence/restoration)

- Time marker - Date

- Time (hours:minutes)

• Printing at the following start conditions is possible:

- Date - Time (hours:minutes)

- Recording format - Chart feed speed

- Recorder ID No.

• Manual demand printing also is possible.

Printing is started by DMD key or external switch input, time

(hours:minutes) and measurement values (PV values) are

printed.

• When trend + schedule demand recording is selected as

the recording format, the measurement value (PV value)

of up to eight preset times can automatically be printed.

• Up to 24 digital inputs are supported: 12 external switch

inputs coupled to remote switches, and 12 internal contact

inputs that are connected to internal signals.

Output signals for up to 96 events (4 types x 24 channels)

can be connected to any 12 internal contact inputs.

• Parameter setups can be assigned to user function keys.

(up to eight types for each of the two switches)

• Printing of "Date/Time (hours:minutes)", "Scale" and "event"

can be disabled.

• Seven list printing modes are available for printing setup

data: partial list print, function list print (four modes), total

list print and list print are available. Any list (85 characters

x 3 lines) can be printed as a user setup list from a loader

or by CPL communications.

• Upscale, downscale or OFF can be set as the thermocouple

burnout setting for each input channel.

• Batch count (1 to 99) that is incremented and printed out at

each start of recording can be set.

• Setup data is protected in EEPROM when the power is

OFF.

• Copy setting:

Various setup data can be copied between channels.

• Segment table setup:

Output values (Y-axis) for input values (X-axis) can be

offset by setting up segment tables.