| No comment |
FS-M1P KEYENCE Fiber amplifier NEW
Description
FS-M1P KEYENCE Fiber amplifier NEWProduct Description:
Easy to see Sensitivity Indicator
An easy-to-see indicator is added to an 8-turn trimmer. The indicator shows the sensitivity setting at a glance, allowing anyone to easily check the setting.
Interference Prevention
8 fiber units can reliably detect in close proximity. In TURBO MODE, up to 8 fiber units can be used side-by-side without mutual interference. (Up to four fiber units can be used if using both TURBO MODE and FINE MODE.)
Two great features in one amplifier:
1. Ultra-fine adjustment
FINE MODE reliably detects minute height or color differences.
2. Ultra long range
TURBO MODE has twice the detecting distance of conventional models.
Turbo mode doubles the beam power
FINE MODE for precise detection and TURBO MODE for long-distance detection
The FS-M series is built for use in harsh environments while enabling minute adjustments for accurate target detection. Just move the switch to select the modes.
In FINE MODE, the FS-M offers the same detecting distance as conventional high-power models, about 1.5 times that of other amplifiers. In TURBO MODE, it offers twice the detecting distance of FINE MODE.
High-speed response of 20 µs
The new FS-M1H has a response time more than 10 times faster than the FS-M. (20us) This enables detection on high-speed lines or for high-speed counting.
Specifications:
Type
Manual Calibration
Main unit
1-line expansion unit
High-speed response
0-line expansion unit
Model
NPN
FS-M1
FS-M2
FS-M1H
FS-M0
PNP
FS-M1P
FS-M2P
-
-
Light source
Red LED
Response time
250 µs (FINE), 500 µs (TURBO)
20 µs (FINE), 50 µs (TURBO)
410 µs to 1.2 ms (1)
Operation mode
LIGHT-ON/DARK-ON (switch-selectable)
Timer function
ON-delay: 40 ms, OFF-delay: 40 ms, Timer OFF (switch selectable)
Control output
NPN or PNP:100 mA max. (40 V max.) Residual voltage: 1 V max. (2)
Power supply
12 to 24VDC ±10% (3)
Ambient light
Incandescent lamp: 10,000 lux max. Sunlight: 20,000 lux max.
Ambient temperature
-10°C to 55°C (14 to 131°F), No condensation
Relative humidity
35 to 85%, No condensation
1. The response speed varies depending on the number of expansion units connecte
2. The FS-T0/M0 have no control output.
3. Power to the FS-T0/M0 is supplied through the FS-R0. Power to the FS-T2/M2 is supplied through the FS-V1/T1/M1.
