FS-V32P KEYENCE Fiber amplifier NEW

FS-V32P KEYENCE Fiber amplifier NEW

Product Description:

Strong beam (beam intensity is 64 times that of conventional models)

The world's fastest response speed of 33μs

World's first with the default auto-tracking feature

The world's first energy increase in switch

Stable detection of the end of their life

Specifications:

Light source:

Red, 4-element LED (Wavelength: 640 nm)

Output selection:

LIGHT-ON/DARK-ON (switch-selectable)

Display indicator:

Operation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) and

Current Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64512; Excess gain: 0P to 999P,

Hold function: Possible to display both peak and bottom hold values.selectable from 5 variations

Bar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling display

Detection mode:

Light intensity (area detection possible, automatic sensitivity-tracking function provided)/

[Limited light intensity/Count check/Abnormality detection] 1

Timer function:

OFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectable

Timer duration selectable: 0.1 ms to 9999 ms, Maximum error against the setting value: ±10% max.

Control output:

NPN open-collector 40 V, 100 mA max.2. (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.

PNP open-collector 30 V, 100 mA max.2. (main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.

Monitor outpu:

Voltage output: 1 to 5 V 3., Load resistance: 10 kΩ min., Repeatability: ±0.5% of F.S., Response time: 1 ms (FS-V31M only)

External input 4:

Input time: 2 ms (ON)/20 ms (OFF) min.

Unit expansion:

Up to 16 expansion units can be connected (a total of 17 units). Note that the 2-output type should be counted as two units.

Power supply:

12 to 24 VDC ±10%, ripple: 10% max. Class 2

Current consumption:

Normal operation: 990 mW (at 24 V: 42 mA max, at 12 V: 83 mA max.) / Power-saving mode: 820 mW (at 24 V: 34 mA max, at 12 V: 68 mA max.)

Ambient illumination:

Incandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max.

Ambient temperature:

14 to 131°F (-10 to 55°C), No condensation 5

Relative humidity.:

35 to 85%, No condensation

Vibration:

10 to 55 Hz, double amplitude: 0.06" 1.5 mm, 2 hours each in the X, Y and Z axis

Shock:

500 m/s2 in X, Y, and Z directions, 3 times respectively

Housing:

olycarbonate

Size:

1.19" 30.3 mm (H) x 0.39" 9.8 mm (W) x 2.83" 71.8 mm (D)

Accessory:N/A

1. Only 2-output type.

2. Total current of two outputs should be less than 100 mA.

3. Output range:1 to 5 V for the display value 0 to 4096 at HIGH SPEED/FINE/TURBO mode.

4. FS-V31C(P)/V32C(P)/V33(P)/V34(P)

5. If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.1 to 2 Units: 14 to 131°F (-10 to 55°C), 3 to 10 Units: 14 to 122°F (-10 to 50°C), 11 to 16 Units: 14 to 113°F (-10 to 45°C)