NPort 5430I M0XA Serial device servers 4-port RS-422/485 optical isolation

NPort 5430I M0XA Serial device servers 4-port RS-422/485 optical isolation

If you need more than 10pcs and want to get better wholesale price, please feel free to contact us by following:
email:[email protected]
Tel:0086-574- 88333153
We will quote you our best price to you in 24hours.

NPort 5430I  

Features and Benefits

10/100M auto-sensing Ethernet

4 serial ports, with support for RS-232, RS-422, and RS-485

Built-in 15 KV ESD surge protection for all serial signals

Versatile socket operation modes, including TCP Server, TCP Client, UDP, and Real COM

Choice of configuration methods: Web console, Telnet console, and Windows utility

SNMP MIB-II for network management

2 KV isolation protection for NPort 5430I/5450I/5450I-T

-40 to 75°C operating temperature range (T model)

 

Overview

Network Readiness for up to Four Serial Devices

NPort 5400 series device servers can conveniently and transparently connect up to four serial devices to an Ethernet network, allowing you to network your existing serial devices with only basic configuration. Data transmission between the serial and Ethernet interfaces is bi-directional. By using NPort device servers, you not only protect your current hardware investment, but also allow for future network expansion. You can both centralize the management of your serial devices, and distribute management hosts over the network.

• Ethernet Interface
Number of Ports	1
Speed	10/100 Mbps, auto MDI/MDIX
Connector	8-pin RJ45
Magnetic Isolation Protection	1.5 KV built-in
• Serial Interface
Number of Ports	4
Serial Standards	NPort 5410: RS-232 NPort 5430/5430I: RS-422/485 (software selectable) NPort 5450/5450I/5450-T/5450I-T: RS-232/422/485 (software selectable)
Connector	NPort 5410/5450/5450I/5450-T/5450I-T: DB9 male NPort 5430/5430I: Terminal block
Serial Line Protection	15 KV ESD protection for all signals 2 KV isolation protection (NPort 5430I/5450I/5450I-T)
RS-485 Data Direction Control	ADDC® (automatic data direction control)
Pull High/Low Resistor for RS-485	1 KΩ, 150 KΩ
Terminator for RS-485	120 Ω
• Serial Communication Parameters
Data Bits	5, 6, 7, 8
Stop Bits	1, 1.5, 2
Parity	None, Even, Odd, Space, Mark
Flow Control	RTS/CTS and DTR/DSR (RS-232 only), XON/XOFF
Baudrate	50 bps to 921.6 Kbps
• Serial Signals
RS-232	TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422	Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w	Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w	Data+, Data-, GND
• Software
Network Protocols	ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP, Rtelnet, ARP
Configuration Options	Web Console, Telnet Console, Windows Utility
Windows Real COM Drivers	Windows (2012 x64, 8/7/XP/2003/Vista/2008 x86/x64, 2000, 98/ME/NT), Embedded CE 5.0/6.0, XP Embedded
Fixed TTY Drivers	SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i
Linux Real TTY Drivers	Linux kernel 2.4.x, 2.6.x, 3.x
• Mini Screen with Push Buttons (standard temp. models only)
LCD Panel	Liquid Crystal Display on the case
Push Buttons	Four push buttons for convenient on-site configuration
• Physical Characteristics
Housing	Metal, IP30 protection
Weight	740 g
Dimensions	Without mounting kit: 158 x 103 x 33 mm (6.22 x 4.06 x 1.30 in) With mounting kit: 176 x 103 x 33 mm (6.93 x 4.06 x 1.30 in)
• Environmental Limits
Operating Temperature	Standard Models: 0 to 55°C (32 to 131°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature	-40 to 75°C (-40 to 167°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
• Power Requirements
Input Voltage	12 to 48 VDC
Power Consumption	NPort 5410: 350 mA @ 12 V, 190 mA @ 24 V NPort 5430: 320 mA @ 12 V, 175 mA @ 24 V NPort 5430I: 530 mA @ 12 V, 280 mA @ 24 V NPort 5450/5450-T: 350 mA @ 12 V, 190 mA @ 24 V NPort 5450I/5450I-T: 554 mA @ 12 V, 294 mA @ 24 V
• Standards and Certifications
Safety	UL 60950-1, EN 60950-1
EMC	CE, FCC
EMI	EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS	EN 55024
Marine	DNV (standard temp. models only)
Medical	EN 60601-1-2 Class B, EN 55011
• Reliability
Alert Tools	Built-in buzzer and RTC (real-time clock)
Automatic Reboot Trigger	Built-in WDT (watchdog timer)
MTBF (mean time between failures)	NPort 5410: 205,153 hrs NPort 5430: 201,699 hrs NPort 5430I: 114,540 hrs NPort 5450/5450I: 206,903 hrs NPort 5450-T/5450I-T: 206,903 hrs